GPS Tracker Firmware Update: How to Do It Safely
What a GPS tracker firmware update is, how to run one without bricking the device, how to confirm it worked, and what to check when your tracker won't update.

GPS Tracker Firmware Update: How to Do It Safely
A GPS tracker firmware update is a new version of the software built into the tracker itself, and you install it from the tracker’s companion app, not from a map or app store download. The safe routine is short: charge the tracker, put it where it has a signal, start the update in the app, leave it alone until it finishes, then check that location reports still arrive. If you are choosing a tracker for a child, a dog or a parent, pick one where you will never have to chase a manufacturer’s subscription or a separate computer tool to keep it working. That is the reasoning behind Kin One, our one-time-purchase family tracker.
Kinwatchdog
Keep Family Tracking Simple
Kin One tracks kids, pets, and parents on one map, with real-time updates and no ongoing subscription fees.
TL;DR
- Firmware is the software inside the tracker hardware. It is different from the app on your phone and from navigation maps.
- Before any update: charge the tracker well above half, stay in range of your phone, and do not power it off midway.
- Afterward, confirm the update by checking the version number in the app and watching a few fresh location pings.
- If the tracker will not update, the cause is nearly always power, connection or signal, in that order.
- If no update is offered, that is often normal. Only worry when the tracker stops reporting.
Table of Contents
- What GPS tracker firmware is, and what it is not
- Why firmware updates matter for a tracker you rely on
- How to check whether your tracker has an update
- How to update tracker firmware safely
- Why your GPS tracker won’t update
- What if there is no update available?
- Choosing a tracker you will not have to babysit
- Our perspective
- Kin One for families who want fewer things to manage
- FAQ
- Sources
What GPS tracker firmware is, and what it is not
Firmware is the small operating program stored inside the tracker. It tells the chip how to listen for satellites, how often to wake up, how to talk to your phone or the network, and how to manage the battery. You never see it directly. You only see its effects: a pin that appears faster, a battery that lasts longer, a bug that disappears.
People confuse three different things that all get called “updating a GPS”:
What gets updatedWhere it livesWho needs it
Tracker firmware
Inside the tracker hardware
Anyone with a family, pet or senior tracker
The companion app
Your phone, through the app store
Everyone using the tracker
Map data
Car and handheld navigation units
Drivers using turn-by-turn navigation
Much of what ranks for this search is about the third row: downloading new maps to a car navigation unit by choosing a make and model. A family tracker does not work that way. It does not carry a map to drive by. It reports coordinates, and the map you see is drawn by the app on your phone. So “update” for a family tracker means the first row, plus keeping the app current.
If you want the longer version of how the pieces fit together, our guide on how GPS trackers work covers satellites, SIM connections and Wi-Fi in plain language.
Why firmware updates matter for a tracker you rely on
A tracker on a child’s backpack, a dog’s collar or a parent’s coat is only useful if it behaves the same on a bad day as on a good one. Firmware updates are how a manufacturer fixes problems that show up only after thousands of devices are in use: a pin that freezes, a battery that drains too fast in cold weather, a connection that drops in certain buildings.
Three practical reasons to keep up with updates:
- Reliability. Bug fixes often target exactly the complaints families report, such as a stale location or an alert that fires late.
- Battery life. Changes to how the tracker sleeps and wakes can add or lose days between charges.
- Compatibility. When your phone’s operating system changes, the tracker’s way of connecting sometimes has to change with it.
None of this means you should update the moment you see a notice, in the middle of a school run. Pick a calm moment, as described below.
How to check whether your tracker has an update
The exact path differs by brand, but the pattern is consistent: the update lives in the companion app, under the device’s settings. One pet tracker’s help page describes it as opening Settings, tapping an update option, and waiting about 15 minutes for the firmware update to finish. Your model will have its own menu names and timing, so use that as a pattern, not a promise.
A simple way to find yours:
- Open the tracker’s app and select the device, not the account.
- Look for a device settings, device info or about screen.
- Find a firmware or software version line. Write the number down.
- If an update is available, the app usually shows a button or a banner next to that line.
- Make sure the update is meant for your exact model. If the app offers it, it is. If you ever download a file by hand, match the model name and hardware revision printed on the device or box.
Writing down the version number matters because it is your before-and-after proof.
How to update tracker firmware safely
Most failed updates come from interruption, not from the update itself. A tracker that loses power or connection halfway can end up stuck and need the manufacturer’s help to recover. The routine below removes the usual causes.
Before you start
- Charge it. Bring the tracker to a healthy charge, ideally full, before starting. Firmware writing is a bad moment for a battery to die.
- Update your phone app first. An out-of-date app can fail to talk to a newer firmware file.
- Use stable connectivity. A strong home Wi-Fi network or a solid cellular signal keeps the file download from stalling.
- Keep the phone close. If the update travels over Bluetooth, stay within a few feet.
- Pick your timing. Do it when the tracker is not in use. Do not update a child’s tracker during the school day, or a pet’s tracker while the dog is out on a walk.
During the update
- Start the update in the app and leave both devices alone.
- Do not power the tracker off, unplug it from the charger, close the app, or switch phones.
- Expect a pause, a restart and possibly a changed light pattern. These are normal.
- If the progress bar seems stuck, wait longer than you think necessary before taking any action. Many updates look frozen for several minutes.
After the update
This is where most guides stop, and where you should not. Confirm that the update actually worked:
- Check the version number. Compare it with the one you wrote down. It should be higher.
- Watch fresh pings. Carry the tracker outside, near a window or in open air, and see that the pin moves on the map within a normal interval.
- Test an alert. If you use arrival and departure alerts, walk the tracker out of and back into a saved place and see that both fire.
- Check settings. Occasionally an update resets preferences. Look at notification and privacy settings once.
- Charge it normally and watch the battery over a day or two. A sudden big change deserves a note.
Our setup guide walks through the same kind of first-day checks for a new tracker, and they apply after an update too.
Why your GPS tracker won’t update
The most common support question around this keyword is some form of “why isn’t my tracker updating?” Notice that it can mean two different things: the firmware will not install, or the location pin on the map is not refreshing. Treat them separately.
When the firmware will not install
Work through this list in order, because the early causes are the most common:
- Power. Is it charged and switched on? Plug it in and try again.
- App. Is the app up to date and logged in to the right account?
- Connection. Move closer to the phone, toggle Bluetooth off and on, or switch to a stronger Wi-Fi network.
- Restart. Close the app fully, restart the phone and restart the tracker, then try once more.
- Storage. A phone with almost no free space can fail to save the download.
- Wait and retry. Servers sometimes get busy when a release rolls out. Trying again later fixes more than you would expect.
If it still fails after one clean retry, stop trying repeatedly and contact the manufacturer’s support with your model, the version number you wrote down, and what the app showed. Repeated interrupted attempts are what turn a small problem into a bigger one.
When the pin on the map will not refresh
This is usually not a firmware problem at all. A tracker has to do two jobs: work out where it is (positioning) and send that result to you (reporting). It can succeed at one and fail at the other. A pin that is hours old might mean the tracker is sitting indoors with no sky view, or that it has a position but no connection to deliver it. Our guide to GPS tracker troubleshooting separates these two jobs, and the article on a GPS tracker not updating helps you tell a stale pin from a dead device.
Quick checks for a stale pin:
- Is the tracker charged and on?
- Is it somewhere with a view of open sky, not a metal bag, a basement or a car footwell?
- Does the app show a last-seen time? A recent time with an old location points to a positioning problem. An old last-seen time points to a reporting problem.
- Did your phone’s battery saver or app permissions change recently?
What if there is no update available?
Often nothing is wrong. Manufacturers do not release firmware on a schedule, and a tracker that already runs the latest version will simply show no update. Your check is whether it behaves well: pings arrive, alerts fire, the battery lasts as expected.
Things to do when no update appears:
- Confirm the version number against the manufacturer’s support page for your model, if one is listed.
- Make sure the app itself is current, since some updates are offered only to newer app versions.
- Keep the tracker’s charging cable and routine consistent, because a healthy battery prevents many symptoms people blame on old firmware.
If the manufacturer has stopped supporting a model, a tracker may keep working for a long time, but you get no fixes and the app may eventually lose compatibility with new phones. For a device a child or an elderly parent depends on, that is a reason to plan a replacement before it becomes urgent, not after a missed alert.
Choosing a tracker you will not have to babysit
Firmware upkeep is easier when the device is simple and the company behind it has a clear model. Before buying any family tracker, look at:
- A one-time price with no subscription. A monthly plan can lapse, and when it does, the tracker stops reporting even if its firmware is perfect. Our piece on why a tracker should never have a monthly bill explains the reasoning, and the no monthly fee checklist shows what to look at.
- A warranty. A hardware fault that looks like a failed update is covered only if there is a warranty to cover it.
- Clear privacy controls. You should be able to see who can view a location and delete stored routes.
- A single map for the whole family. One app to keep current is easier than three.
If you are comparing radio types, our explainer on GPS versus Bluetooth trackers shows why a real GPS device is the right base for kids, pets and seniors.
Our perspective
We built Kin One around a simple idea: a tracker is a safety tool, and a safety tool should not depend on a bill you might forget to pay.
That is why Kin One is a one-time purchase at $99, with lifetime network data and no monthly fees. You pay once, and the tracker keeps reporting. For a family, that removes one of the quietest ways a tracker fails: the plan that expires while the device sits in a school bag.
We also kept the design narrow on purpose. Kin One puts kids, pets and parents on one map, sends arrival and departure alerts, and lets you add up to five approved emergency contacts. It does not include audio monitoring or an onboard camera, and it gives you privacy controls, including route deletion and user-managed visibility. Fewer moving parts means less for you to check, update and worry about.
Our advice on upkeep is the same whatever tracker you hold: write down the version, charge before you update, and confirm the result with a real walk outside. The routine takes ten minutes and keeps the tracker dependable.
Louis
Kin One for families who want fewer things to manage
Kin One is a GPS tracker and app for families, sold as a one-time $99 purchase. It shows kids, pets and parents on a single map with live updates, sends arrival and departure alerts, supports up to five approved emergency contacts, and comes with a two-year warranty and no subscription. If you want a tracker for a child, a dog or a parent that does not come with a monthly plan to maintain, see Kin One.
You can also read how it fits your situation: kids, teens, seniors or pets.
FAQ
Is a GPS tracker firmware update the same as a map update?
No. A map update refreshes the road data in a car or handheld navigation unit. Tracker firmware is the software inside the tracker itself, and it is normally installed from the tracker’s companion app. A family tracker draws its map in the app on your phone, so you keep that current through app store updates.
How long does a tracker firmware update take?
It depends on the model. One published pet tracker guide mentions roughly 15 minutes, but others may be faster or slower. Keep the tracker charged and the phone nearby, and wait for the app to say it has finished before you move or switch anything off.
Can a firmware update break my tracker?
The risk comes mostly from interruption, such as a dead battery or a lost connection halfway through. Charging first, staying in range and leaving everything alone until it finishes removes nearly all of that risk. If the tracker misbehaves afterward, restart it once and then contact the manufacturer’s support with your version number.
Why does my GPS tracker say it is not updating?
Check charge, sky view and the last-seen time in the app. A stale pin usually means the tracker could not find a position or could not send one, which is a signal or connection issue rather than old firmware. Our stale pin guide goes through each case.
Do I need to update a tracker that works fine?
If pings arrive on time, alerts fire and the battery lasts as expected, you do not have to chase every update. Install updates when you have a quiet window and the tracker is charged, especially if the notes mention fixes for something you have noticed.